Showing 1–16 of 66 results

MMATS-AS8

AS8 Active Subwoofers

The MMATS AS8 powered subwoofer for cars will wake up your factory car audio system with a powerful bass extension that the stock system lacks. It’s perfect for vehicles with minimal space, fits under seats, behind pickup truck rear seats or even in the tire well of the trunk. Perfect for lease cars or company cars as their is not a non reversible installation required. Quickly return your car back to factory stock with very little effort. Don’t give up your music sound Quality any longer. Your MMATS Professional Audio dealer can install an AS8 powered subwoofer for you in no time!

MMATS-PS65cx

PS65cx Coaxials

PS 65cx Point source coaxial 6.5 inch car speakers offer the ultimate in sound quality for your car or truck. Silk dome tweeters and glass fiber cones with Santoprene surrounds offer unsurpassed performance at impressively low MSRP. Exceptional sound that surpasses our competitors offerings often at double our MSRP price.

MMATS-CX6 Pro

CX6 Pro EQ

The MP-5 is a stereo, 10 Volt Line Driver / 5 Band EQ with sub-sonic filter & Crossover used to balance and correct car audio response problems.

MMATS-PS69cx

PS69cx Coaxials

The MMATS PS 69cx point source 6×9 coaxial car speakers offer silk dome tweeters and glass fiber cone assemblies for solid bass and smooth detailed mid and high frequencies. Features a durable santoprene cone surround for long lasting and articulate bass frequencies. If your car speaker cutout openings fit a 6″x9″ size speaker and you are seeking tremendously improved sound quality, high power handling and sonically pleasing performance then check out the PS69cx full range 2 way car speakers at your favorite MMATS dealer today.

MMATS-DT10X

DT10X DT Series

Several years ago a company called EV was producing a series of Prosound speakers that rapidly became a strong seller to the Donk and Box-Chevy customers. These “louds” are mounted in the doors and out the back of the vehicle and were the rage at the time. As fate would have it, EV was bought out by Bosch Corporation and moved all of their manufacturing to Mexico….sure are hearing a lot about this lately. Bosch figured they would just re-do their tooling in Mexico for the molds that make the soft-parts so they left these behind. As MMATS builds Subwoofers here in the USA using most of the manufacturers that build these soft-parts, we began to investigate the possibility of sourcing the original parts. After quite the effort, every original part was found and the first Prototype was built. The sound was truly amazing! Comparing a full-fledged EV DL10X to our DT10X was stunning. Almost an identical match. From the Voice Coil to the Cone-body to the Spider to the Dust Cover, only the frame and motor structure are different. Everything else is the actual part from EV. This speaker is leaps and bounds ahead of anything from Asia that other companies are touting as “equivalent”. Oh and did I mention, Made in the USA!! Pound to do it…worth the price!
They are available in 10”, 12” and 15” models. They produce mid-bass and midrange frequencies with exceptional vocals and fast transients. They can reach frequencies of 6000 Hz but we recommend a 12dB low-pass frequency setting between 4Khz to 5Khz.

MMATS-DT12X

DT12X DT Series

Several years ago a company called EV was producing a series of Prosound speakers that rapidly became a strong seller to the Donk and Box-Chevy customers. These “louds” are mounted in the doors and out the back of the vehicle and were the rage at the time. As fate would have it, EV was bought out by Bosch Corporation and moved all of their manufacturing to Mexico….sure are hearing a lot about this lately. Bosch figured they would just re-do their tooling in Mexico for the molds that make the soft-parts so they left these behind. As MMATS builds Subwoofers here in the USA using most of the manufacturers that build these soft-parts, we began to investigate the possibility of sourcing the original parts. After quite the effort, every original part was found and the first Prototype was built. The sound was truly amazing! Comparing a full-fledged EV DL10X to our DT10X was stunning. Almost an identical match. From the Voice Coil to the Cone-body to the Spider to the Dust Cover, only the frame and motor structure are different. Everything else is the actual part from EV. This speaker is leaps and bounds ahead of anything from Asia that other companies are touting as “equivalent”. Oh and did I mention, Made in the USA!! Pound to do it…worth the price!

They are available in 10”, 12” and 15” models. They produce mid-bass and midrange frequencies with exceptional vocals and fast transients. They can reach frequencies of 6000 Hz but we recommend a 12dB low-pass frequency setting between 4Khz to 5Khz.

MMATS-DT15X

DT15X DT Series

Several years ago a company called EV was producing a series of Prosound speakers that rapidly became a strong seller to the Donk and Box-Chevy customers. These “louds” are mounted in the doors and out the back of the vehicle and were the rage at the time. As fate would have it, EV was bought out by Bosch Corporation and moved all of their manufacturing to Mexico….sure are hearing a lot about this lately. Bosch figured they would just re-do their tooling in Mexico for the molds that make the soft-parts so they left these behind. As MMATS builds Subwoofers here in the USA using most of the manufacturers that build these soft-parts, we began to investigate the possibility of sourcing the original parts. After quite the effort, every original part was found and the first Prototype was built. The sound was truly amazing! Comparing a full-fledged EV DL10X to our DT10X was stunning. Almost an identical match. From the Voice Coil to the Cone-body to the Spider to the Dust Cover, only the frame and motor structure are different. Everything else is the actual part from EV. This speaker is leaps and bounds ahead of anything from Asia that other companies are touting as “equivalent”. Oh and did I mention, Made in the USA!! Pound to do it…worth the price!

They are available in 10”, 12” and 15” models. They produce mid-bass and midrange frequencies with exceptional vocals and fast transients. They can reach frequencies of 6000 Hz but we recommend a 12dB low-pass frequency setting between 4Khz to 5Khz.

MMATS-HD4000.05

HD4000.05 Amplifiers HD Series

4000 Watts RMS Competition Amplifiers
New heatsink design! More power and reliability!
Extreme engineering from extreme power!

MMATS-HD4000.1

HD4000.1 Amplifiers HD Series

4000 Watts RMS Competition Amplifiers
New heatsink design! More power and reliability!
Extreme engineering from extreme power!

MMATS-Juggernaut12

Juggernaut12 Subwoofers

MMATS 12 inch car subwoofer for thundering bass response that will astound you.

MMATS-Juggernaut15

Juggernaut15 Subwoofers

MMATS Juggernaut 15 inch car Subwoofer – bolt a pair of Juggernaut’s in your car today and experience the ultimate car subwoofers

MMATS-Juggernaut18

Juggernaut18 Subwoofers

The MMATS Juggernaut 18 inch car subwoofer is the king of competition level bass and DB drags. Want to make your car the loudest vehicle at the next competition? Install the Juggernauts in your car today for hair blowing competion style bass you can not imagine.

MMATS-M1000.1

M1000.1 Amplifiers

New heatsink design! More power and reliability! Models from 600 to 3000Wrms!
Extreme engineering from extreme power!